Ken's Kayak Pages

Don Beale's Scarfing Jig


"It's not in use here, just positioned.  In use, the vac hose would be
hooked up, and it would be clamped to the table.  There is one pic of a 1/4" spacer between the fence and the table; without spacer 8:1 scarf, with it 12:1.
It works best with two or three peices at a time if cutting through the visible side, so the vac can get a grip.  It holds real tight, just be careful as the small cut-off can be thrown back."

- Don Beale

scarf1.jpg (47875 bytes)

scarf2.jpg (42170 bytes)

scarf3.jpg (25722 bytes)

Return to Kayak Home Page